GE Security EST3 User Manual

EST3 Installation and Service Manual 3.1
Chapter 3
Access control applications
Summary
EST3 supports rugged and adaptable access control systems.
This chapter introduces you to the equipment required for access
control applications.
This chapter also illustrates and describes several access control
applications. Each application is presented as a separate topic
that includes a block diagram and description. These give you an
overview of the application, and show the components required
and their interconnection.
Refer to the EST3 Installation Sheets for specific component
settings and terminal connections.
Security applications make use of the CRC Card Reader
Controller. Refer to the CRC and CRCXM—Card Reader
Controller Installation Sheet for specific installation information
on this module.
Content
Access control equipment • 3.2
Anti-passback • 3.11
Central monitoring station • 3.14
Common door access • 3.16
Delayed egress • 3.18
Elevator control • 3.21
Emergency exit door • 3.24
Handicap access door • 3.26
Maglock peripherals • 3.28
Multiple card readers • 3.30
Muster • 3.32
Power for continuous locks • 3.35
Power for intermittent locks • 3.37
Power from an AC source • 3.39
Power from a remote source • 3.42
Remote controls • 3.45
Two-person rule • 3.47

GE Security EST3 Specifications

General

Brand	GE Security
Model	EST3
Category	Security Sensors
Language	English