Security applications
2.16 EST3 Installation and Service Manual
Each system includes 3-SAC modules as required to support the
security and access control systems implemented.
Rules covering installation and classification (of extent) of alarm
equipment at individual locations are published in the Standard
for Installation and Classification of Burglar and Holdup Alarm
Systems UL681.
SDU programming
No special project programming is required to enable multiple
site security and access control systems. When running the RPM
tool, each site receives 100% of the resources for that site.
Note that all profiles must be sent to the site C headquarters
when the project is finished.
ACDB/KDC operation
At the headquarters site, all three profiles are imported into the
ACDB/KDC program. The result is a global tree of resources
that includes each KPDISP and CRC device in each site.
Importing all the profiles into one ACDB/KDC program creates
the global database.
When additions or changes to the KPDISP database are made,
headquarters can transmit the changes to the affected sites.
To Next Page
Loading...