Access control applications
EST3 Installation and Service Manual 3.15
SDU programming
Reporting access control events to a CMS depends entirely on
programming and the creation of command lists. In essence, you
must assign a command list to each CRC event you want to
report. The command list contains the details of the message to
be transmitted.
The following CRC events can be assigned command events:
• Access granted
• Access granted irregular
• Access granted anti-passback
• Access granted muster
• Access denied unknown
• Access denied reader disabled
• Access denied access level not active
• Access denied outside schedule 1
• Access denied outside schedule 2
• Access denied partition armed
• Access denied PIN not entered
• Access denied PIN not valid
• Access denied two-person timeout
• Access denied anti-passback
• Access denied escort
To Next Page
Loading...