page | 101
Basic Operation
Menu System
4. Press the ▲ or ▼ buttons to select Control IP Settings.
5. Press the OK button to enter the Control IP Settings menu. The current IP mode
setting will be displayed.
6. Press the OK button, again, to edit the current setting.
7. Press the ▲ or ▼ buttons to select either Static or DHCP. In this example, we will
leave the IP mode setting as Static. Consult your network administrator, if necessary,
for required network conguration settings.
ip mode:
static
ip mode: (edit)
static
IP MODE: (edit)
static
network MODE: (EDIT)
combined
OR
LAN
POE
5V DC
1 2
Matrix Controller
Status
IR
Power
Menu
1 2 3
4 5 6
7 8 9
In 0 Out Set
Clear
Mask
Preset
Back
OK
Lock
To Next Page
Loading...
Need help?
General