page | 104
16. Press the OK button to edit the current selection. The rst digit of the address will
ash.
17. Use the numeric keypad to enter the desired subnet mask.
If a one or more digits in the subnet mask is less then three digits in length, then preceding
zeros must be used to pad the value. For example, if one of the numbers is 10, then
you would enter 010 on the keypad. If the number is 5, then you would enter 005.
The cursor will automatically advance to the next digit in the subnet mask. If an error
is made, use the ◄ or ► to move backward or forward between each digit.
18. Press the OK button to save the change. For this example, we will leave the subnet
mask at 255.255.255.0.
19. Press the ▲ or ▼ buttons to select the Gateway setting. The gateway address
will be displayed.
20. Press the OK button to change the setting. The rst digit of the gateway address
will ash.
Basic OperationBasic Operation
Menu System
subnet mask:
_55.255.255.000
subnet mask:
255.255.255.0
gateway
192.168.1.1
gateway
_92.168.1.1
Basic OperationBasic Operation
To Next Page
Loading...
Need help?
General