page | 123
Basic Operation
Menu System
25. Press the OK button to edit the current setting. The rst available digit in the port
setting will ash.
26. Use the numeric keypad to enter the desired listening port.
The port range is 1 to 65535. Use preceding zeros to pad numbers less than 5 digits.
For example, if the listening port is 23, then you would enter 00023.
27. If an error is made, use the ◄ or ► to move backward or forward between each digit.
28. Press the OK button to save the change.
remote udp port: ed
_0008
remote udp port: ed
5000_
remote udp port:
50008
LAN
POE
5V DC
1 2
Matrix Controller
Status
IR
Power
Menu
1 2 3
4 5 6
7 8 9
In 0 Out Set
Clear
Mask
Preset
Back
OK
Lock
OR
To Next Page
Loading...
Need help?
General