4-12
Instrument cluster
Engine coolant temperature
warning light (for 8-inch cluster)
btn_WSA-92
The warning light illuminates:
When the temperature of the engine
coolant is extremely high.
Do not continue driving with an
overheated engine. If your vehicle
overheats, refer to the "If The Engine
Overheats" section in chapter 8.
If the Engine Coolant Temperature
warning light illuminates, it indicates
overheating that may damage the engine.
Low fuel level warning light
btn_W2-09
This warning light illuminates:
When the fuel tank is nearly empty.
Add fuel as soon as possible.
Driving with the Low Fuel Level warning
light on or with the fuel level below "E"
can cause the engine to misfire and
damage the catalytic converter.
Malfunction Indicator Lamp (MIL)
btn_WBH-06
This indicator light illuminates:
• When the Engine Start/Stop button is in
the ON position. It illuminates for about
3 seconds and then goes off.
• Whenever there is a malfunction with
either the emission control system or
the engine or the vehicle powertrain.
If this occurs, have your vehicle
inspected by an authorized retailer of
Genesis Branded products.
• Driving with the Malfunction Indicator
Lamp (MIL) on may cause damage to
the emission control system which
could affect drivability and/or fuel
economy.
• If the enhanced engine protection
system becomes activated due to lack
of engine oil, engine power will be
limited. If such condition continues
repeatedly, the Malfunction Indicator
Lamp will illuminate.
If the Malfunction Indicator Lamp (MIL)
illuminates, potential catalytic converter
damage is possible which could result in
loss of engine power.
If this occurs, have your vehicle inspected
by an authorized retailer of Genesis
Branded products as soon as possible.
0_IK_PE_en_US.book Page 12
To Next Page
Loading...
Need help?
General
