7-36
Driver assistance system
Safe Exit Warning malfunction
and limitations
Safe Exit Warning malfunction
OIK073252AU
When Safe Exit Warning is not working
properly, the "Check Blind-Spot Safety
system" warning message will appear on
the instrument cluster for several
seconds, and the master ( ) warning light
will illuminate on the instrument cluster.
If this occurs, have your vehicle inspected
by an authorized retailer of Genesis
Branded products.
OIK073279L
When the side view mirror warning light is
not working properly, the "Check side
view mirror warning light" warning
message will appear on the instrument
cluster for several seconds, and the
master ( ) warning light will illuminate on
the instrument cluster. If this occurs, have
your vehicle inspected by an authorized
retailer of Genesis Branded products.
Safe Exit Warning disabled
OTM070098N
When the rear bumper around the rear
corner radar or sensor is covered with
foreign material, such as snow or rain, or
installing a trailer or carrier, it can reduce
the detecting performance and
temporarily limit or disable Safe Exit
Warning.
If this occurs, the "Blind-Spot Safety
system disabled. Radar blocked"
warning message will appear on the
instrument cluster.
Safe Exit Warning will operate properly
when such foreign material or trailer, etc.,
is removed, and then the vehicle is
restarted.
If Safe Exit Warning does not operate
properly after it is removed, have your
vehicle inspected by an authorized
retailer of Genesis Branded products.
• Even though the warning message
does not appear on the instrument
cluster, Safe Exit Warning may not
properly operate.
• Safe Exit Warning may not properly
operate in an area (for example, open
terrain) where any objects are not
detected right after the vehicle is
turned on, or when the detecting
sensor is blocked with foreign material
right after the vehicle is turned on.
0_IK_PE_en_US.book Page 36
To Next Page
Loading...
Need help?
General
