5-28
Convenience features
Integrated Memory
if equipped
System
OIK053006
Integrated Memory System for the
driver's seat is provided to store and recall
the following memory settings with a
simple button operation.
• Driver's seat position
• Steering wheel position (power
adjustment)
• Side view mirror position
• Head-Up Display (HUD) position (if
equipped)
Never attempt to operate the integrated
memory system while the vehicle is
moving.
This could result in loss of control, and an
accident causing death, serious injury, or
property damage.
• If the battery is disconnected, the
memory settings will be erased.
• If integrated memory system does not
operate normally, have the system
inspected by an authorized retailer of
Genesis Branded products.
Storing memory positions
1. Shift to P (Park) while the Engine
Start/Stop button is in the ON position.
2. Adjust the driver's seat position, side
view mirror position, steering wheel
position, and head-up display height to
the desired position.
3. Press the SET button. The system will
beep once and notify you "Press button
to save settings" on the cluster display.
4. Press one of the memory buttons (1 or
2) within 4 seconds. The system will
beep twice when the memory has been
successfully stored.
5. "Settings 1 (or 2) saved" will appear on
the cluster display. The message
appears only for the driver's seat
position memory setting.
Recalling memory positions
1. Shift to P (Park) while the Engine
Start/Stop button is in the ON position.
2. Press the desired memory button (1 or
2). The system will beep once, and then
the driver's seat position, side view
mirror position, steering wheel
position, and head-up display height
will automatically adjust to the stored
positions.
3. "Settings 1 (or 2) applied" will appear
on the cluster display.
0_IK_PE_en_US.book Page 28
To Next Page
Loading...
