7
7-61
• Smart Cruise Control may not operate
properly if interfered by strong
electromagnetic waves.
• Smart Cruise Control may not detect an
obstacle in front and lead to a collision.
Always look ahead cautiously to
prevent unexpected and sudden
situations from occurring.
• Vehicles moving in front of you with a
frequent lane change may cause a
delay in Smart Cruise Control reaction
or may cause Smart Cruise Control to
react to a vehicle actually in an adjacent
lane. Always drive cautiously to prevent
unexpected and sudden situations
from occurring.
• Always be aware of the surroundings
and drive safely, even though a warning
message does not appear or an audible
warning does not sound.
• If any other system’s warning message
appears or warning sound is generated,
Smart Cruise Control warning message
may not be displayed and warning
sound may not be generated.
• You may not hear the warning sound of
Forward Collision-Avoidance Assist if
the surrounding is noisy.
• The vehicle manufacturer is not
responsible for any traffic violation or
accidents caused by the driver.
• Always set the vehicle speed under the
speed limit in your area.
• Smart Cruise Control may not operate
for few seconds after the vehicle is
started or the front view camera or
front radar is initialized.
• You may hear a sound when the brake is
controlled by Smart Cruise Control.
Smart Cruise Control
malfunction and limitations
Smart Cruise Control malfunction
OIK073051L
When Smart Cruise Control is not working
properly, the "Check Smart Cruise
Control system" warning message will
appear, and the master ( ) warning light
will illuminate on the instrument cluster.
If this occurs, have your vehicle inspected
by an authorized retailer of Genesis
Branded products.
Smart Cruise Control disabled
OTM070115N
When the front radar cover or sensor is
covered with snow, rain, or foreign
material, it can reduce the detecting
performance and temporarily limit or
disable Smart Cruise Control.
If this occurs the "Smart Cruise Control
disabled. Radar blocked" warning
message will appear for a certain period
of time on the instrument cluster.
0_IK_PE_en_US.book Page 61