6-12
Driving your vehicle
Automatic transmission 
operation
The automatic transmission has eight 
forward speeds and one reverse speed.
The individual speeds are selected 
automatically in the D (Drive) position.
 
To reduce the risk of serious injury or 
death:
• ALWAYS check the surrounding areas 
near your vehicle for people, especially 
children, before shifting a vehicle into D 
(Drive) or R (Reverse).
• Before leaving the driver's seat, always 
make sure the vehicle is shifted to the P 
(Park) position, then apply the parking 
brake, then press the Engine Start/Stop 
button to the OFF position. Unexpected 
and sudden vehicle movement can 
occur if these precautions are not 
followed.
• When using the paddle shifter (manual 
shift mode), do not use engine braking 
(shifting from a high gear to lower gear) 
rapidly on slippery roads. The vehicle 
may slip causing an accident.
 
Transmission ranges
The indicator in the instrument cluster 
displays the gear position when the 
Engine Start/Stop button is in the ON 
position.
However, if the gear is in N (Neutral) or P 
(Park), the position appears on the 
instrument cluster when the Engine 
Start/Stop button is in the OFF or ACC 
position.
P (Park)
Always come to a complete stop before 
shifting into P (Park).
OIK063002
To shift the gear to P (Park), press the P 
button while depressing the brake pedal.
If you turn the engine off in R (Reverse) or 
D (Drive), the gear will automatically shift 
to P (Park).
 
• Shifting into P (Park) while the vehicle is 
in motion may cause you to lose control 
of the vehicle.
• After the vehicle has stopped, always 
make sure the vehicle is in P (Park), 
apply the parking brake, and turn the 
engine off.
• When parking on an incline, shift the 
gear to P (Park) and apply the parking 
brake to prevent the vehicle from 
rolling downhill.
 
Automatic gear shift to P (Park)
The gear is shifted to P (Park) 
automatically for safety reasons under 
the following conditions:
• When the engine is turned off with the 
gear in R (Reverse), D (Drive) or N 
(Neutral).
• When the driver's door is opened with 
the gear in D (Drive) or R (Reverse) with 
the seat belt unfastened and the 
vehicle is at a standstill.
0_IK_PE_en_US.book  Page 12