6-8
Driving your vehicle
 
To prevent damage to the vehicle:
• If the engine stalls while you are in 
motion, do not attempt to shift the gear 
to the P (Park) position.
If traffic and road conditions permit, 
you may put the gear in N (Neutral) 
while the vehicle is still moving and 
press the Engine Start/Stop button in 
an attempt to restart the engine.
• Do not push or tow your vehicle to start 
the vehicle.
 
 
To prevent damage to the vehicle:
Do not press the Engine Start/Stop button 
for more than 10 seconds except when 
the stop lamp fuse is blown.
When the stop lamp fuse is blown, you 
cannot normally start the engine. Replace 
the fuse with a new one. If you are not 
able to replace the fuse, you can start the 
engine by pressing and holding the 
Engine Start/Stop button for 10 seconds 
with the Engine Start/Stop button in the 
ACC position.
For your safety always depress the brake 
pedal before starting the vehicle.
 
Emergency starting
OIK063001
If the smart key battery is weak or the 
smart key does not work correctly, you 
can start the engine by pressing the 
Engine Start/Stop button with the smart 
key in the direction of the illustration 
above.
Turning off the engine
1. Stop the vehicle and depress the brake 
pedal fully.
2. Press the P button to shift to P (Park).
3. Press the Engine Start/Stop button to 
the OFF position and apply the parking 
brake.
0_IK_PE_en_US.book  Page 8