Genesis G70 - Blind-Spot Collision-Avoidance Assist Settings

7
7-25
• Do not apply license plate frame or
objects, such as a bumper sticker, film
or a bumper guard near the rear corner
radar.
• Blind-Spot Collision-Avoidance Assist
may not work properly if the bumper
has been replaced, or the surroundings
of the rear corner radar have been
damaged or paint has been applied.
• If a trailer, carrier, etc., is installed, it
may adversely affect the performance
of the rear corner radar or Blind-Spot
Collision-Avoidance Assist may not
operate.
Blind-Spot
Collision-Avoidance Assist
settings
Blind-spot safety
OIK073022N
With the engine on, select Setup >
Vehicle > Driver Assistance > Driving
Safety > Blind-Spot Safety from the
Settings menu in the infotainment system
to set whether to use each function.
• If Blind-Spot Safety is selected,
Blind-Spot Collision-Avoidance Assist
will warn the driver with a warning
message, an audible warning
depending on the collision risk levels.
Braking assist will be applied for
parking exits depending on the collision
risk levels.
2C_BlindSpotSafetyOffInfo
When the vehicle is restarted with
Blind-Spot Collision-Avoidance Assist off,
the "Blind-Spot Safety System is Off"
message will appear on the instrument
cluster.
If you select Blind-Spot Safety, warning
light on the side view mirror will blink for
three seconds. In addition, if the vehicle is
turned on, when Blind-Spot Safety is
selected, the warning light on the side
view mirror will blink for 3 seconds.
WARNING
The driver should always be aware of the
surroundings and drive safely. If
Blind-Spot Safety is deselected,
Blind-spot Collision-Avoidance Assist
cannot assist you.
Information
If the vehicle is restarted, Blind-Spot
Collision-Avoidance Assist will maintain
the last setting.
0_IK_PE_en_US.book Page 25