5-84
Convenience features
OIK053047L
Never place anything near the sensor to
ensure better control of the heating and
cooling system.
Manual temperature control
mode
The heating and cooling system can be
controlled manually by pushing buttons
other than the AUTO button. In this case,
the system works sequentially according
to the order of buttons selected.
When pressing any button except the
AUTO button while using automatic
operation, the functions not selected will
be controlled automatically.
1. Start the vehicle.
2. Set the mode to the desired position.
To improve the effectiveness of heating
and cooling, select the mode according
to the following:
• Heating:
• Cooling:
3. Set the temperature control to the
desired position.
4. Set the air intake control to Fresh or
Recirculation mode.
5. Set the fan speed control to the desired
speed.
6.If air conditioning is desired, turn the air
conditioning system on.
7. Press the AUTO button to convert to full
automatic control of the system.
The climate control system settings will
be maintained, even when the vehicle is
turned OFF. However, the climate control
system settings will be initialized when
the battery has been discharged, or when
the cables have been disconnected
In this case, adjust the climate control
system settings again.
Mode selection
OIK053084N
• Touch the arrows on the climate control
information screen to select air flow
direction.
• Touch SYNC. The SYNC indicator light
on the icon turns off, the temperature
of the driver's seat and passenger seat
can be controlled individually.
0_IK_PE_en_US.book Page 84
To Next Page
Loading...
