6-30
Driving your vehicle
AUTO HOLD turning Off! Press brake 
pedal
OIK060067L
When the conversion from Auto Hold to 
EPB is not working properly a warning will 
sound and a message will appear.
When this message appears, Auto Hold 
and EPB may not operate. For your safety, 
depress the brake pedal.
Press brake pedal to deactivate AUTO 
HOLD
OIK060071L
If you did not apply the brake pedal when 
you release Auto Hold by pressing the 
AUTO HOLD switch, a warning will sound 
and a message will appear.
AUTO HOLD conditions not met. Close 
door and hood.
OIK060072L
When you press the AUTO HOLD switch, if 
the driver's door and engine hood are not 
closed, a warning will sound and a 
message will appear on the cluster 
display.
Press the AUTO HOLD switch after closing 
the driver's door and hood.
Anti-lock Brake System (ABS)
 
Anti-Lock Braking System (ABS) or 
Electronic Stability Control (ESC) system 
will not prevent accidents due to 
improper or dangerous driving 
maneuvers. Even though vehicle control 
is improved during emergency braking, 
always maintain a safe distance between 
you and objects ahead of you. Vehicle 
speeds should always be reduced during 
extreme road conditions. The braking 
distance for vehicles equipped with ABS 
or ESC may be longer than for those 
without these systems in the following 
road conditions.
Drive your vehicle at reduced speeds 
during the following conditions:
• Rough, gravel or snow-covered roads.
• On roads where the road surface is 
pitted or has different surface height.
• Tire chains are installed on your vehicle.
0_IK_PE_en_US.book  Page 30