7-46
Driver assistance system
Driver Attention Warning
operation
Basic function
The basic function of Driver Attention
Warning is to warn the driver "Consider
taking a break".
Taking a break
OTM070105L
The "Consider taking a break" message
will appear and the driver's attention ( )
warning light will blink on the instrument
cluster with a warning sound to suggest
that the driver take a break, when the
driver's attention level is below a certain
level.
• Driver Attention Warning will not
suggest a break when the total driving
time is shorter than 4 minutes or 4
minutes has not passed after the last
break was suggested.
• The "Taking a break" will operate when
your vehicle speed is above 0-120 mph
(0-200 km/h).
For your safety, only change the Settings
after parking the vehicle at a safe
location.
• Driver Attention Warning may suggest
a break depending on the driver's
driving pattern or habits, even if the
driver doesn't feel fatigue.
• Driver Attention Warning is a
supplemental function and may not be
able to determine whether the driver is
inattentive.
• A driver who feels fatigued should take
a break at a safe location, even though
there is no break suggestion by Driver
Attention Warning.
For more information on instrument
cluster settings, refer to the "Cluster
Display (Type A)", "Cluster Display (Type
B)" section in chapter 4.
0_IK_PE_en_US.book Page 46
To Next Page
Loading...
Need help?
General
