9
9-53
Engine compartment panel
fuse replacement
Blade fuse/Cartridge fuse
1. Turn the vehicle off.
2. Turn all other switches off.
3. Remove the fuse panel cover by
pressing the tap and pulling up.
4. Check the removed fuse and replace it
if it is blown. To remove or insert the
fuse, use the removal tool in the engine
compartment fuse panel.
Blade type fuse
OIK093025
Cartridge type fuse
OIK093026
5. Push in a new fuse of the same rating,
and make sure it fits tightly in the clips.
If it does not fit tightly, consult an
authorized retailer of Genesis Branded
products.
After checking the fuse panel in the
engine compartment, securely install the
fuse panel cover. You may hear a clicking
sound if the cover is securely latched. If it
is not securely latched, electrical failure
may occur from water contact.
Multi fuse/Midi fuse
Multi type
OIK093027
Midi type
OIK093028
If the multi fuse or midi fuse is blown,
consult an authorized retailer of Genesis
Branded products.
0_IK_PE_en_US.book Page 53
To Next Page
Loading...
Need help?
General
