7
7-87
Surround View Monitor 
operation
Parking/View button
OIK073065
Press the Parking/View button (1) to turn 
on Surround View Monitor.
Press the Parking/View button (1) again to 
turn off the function.
Front view
OIK073241N
The front view appears on the screen 
when the gear is in N (Neutral) or D (Drive) 
to assist in parking.
You may select top view, front view, side 
view and wide view using the change 
view button (2).
Operating conditions
• The gear is shifted to N (Neutral) or D 
(Drive) from R (Reverse) and the vehicle 
speed is 6 mph (10 km/h) or less.
• The Parking/View button (1) is pressed, 
while the gear is in N (Neutral) or D 
(Drive), and vehicle speed is 6 mph (10 
km/h) or less.
• The Parking Distance Warning occurs 
while the gear is in D (Drive). (When 
Setup > Vehicle > Driver Assistance > 
Parking Safety > Surround View 
Monitor Auto On is selected from the 
Settings menu in the infotainment 
system)
 
When the front view is activated, the 
latest used view mode appears.
 
Off conditions
• The gear is shifted from N (Neutral) or D 
(Drive) to P (Park) or R (Reverse).
• The Parking/View button (1), the home 
button (3), or the infotainment system 
button (4) is pressed.
• Vehicle speed is above 6 mph (10 
km/h).
 
Surround View Monitor may turn off when 
vehicle speed is above 6 mph (10 km/h). 
However, Surround View Monitor may 
not turn on again although vehicle speed 
drops below 6 mph (10 km/h).
 
0_IK_PE_en_US.book  Page 87