5-30
Convenience features
Seat easy access
Seat easy access will move the driver's
seat and steering wheel automatically as
follows:
• Exiting the vehicle:
The driver's seat, steering wheel and
seat bolster will move as follows when
the Engine Start/Stop button is in the
OFF position with the gear in P (Park)
and the driver's door open.
- Driver seat: Moves rearward
depending on the distance selected
from the Settings menu in the
infotainment system.
- Steering wheel: Moves upward
- Seat bolster (if equipped): Adjusted
to the default position.
However, the driver's seat may not
move rearward if there is not enough
space between the driver's seat and the
rear seats.
Also, on a regular basis, the steering
wheel will also move forward to adjust
its location by itself.
• Entering the vehicle:
The driver's seat, steering wheel and
seat bolster will move as follows when
the Engine Start/Stop button is pressed
to the ACC, ON or START position or
while carrying the smart key, the
driver's door is closed with the Engine
Start/Stop button in the OFF position.
- Driver seat: Moves back to its original
position.
- Steering wheel: Moves back to its
original position.
- Seat bolster (if equipped): Adjusted
to the default position.
• You can set the Seat Easy Access
function from the Settings menu in the
infotainment system. Select:
- Driver seat
Setup > Vehicle > Seat > Seating
Easy Access > Driver Seat Easy
Access > Extended/Normal/Off
- Steering wheel
Setup > Vehicle > Seat > Seating
Easy Access > Steering Easy Access
The infotainment system may change
after software updates. For more
information, refer to the user's manual
provided in the infotainment system and
the quick reference guide.
0_IK_PE_en_US.book Page 30