7-24
Driver assistance system
OIK073203
Blind-Spot Collision-Avoidance Assist
helps detect and informs the driver that a
vehicle is approaching at high speed from
the blind spot area.
Warning timing may vary depending on
the speed of the vehicle approaching at
high speed.
OIK073206
When you are driving forward out of a
parking space, if Blind-Spot
Collision-Avoidance Assist judges that
there is a collision risk with an
approaching vehicle in the blind spot, it
can help avoid collision by applying the
brake.
Detecting sensor
OIK073093
(1) Rear corner radar
See the illustration above for the detailed
location of the detecting sensors.
Take the following precautions to
maintain optimal performance of the
detecting sensor:
• Never disassemble the detecting
sensor assembly, or cause any damage
to it.
• If the rear corner radar or near the radar
has been damaged or impacted in any
way, even though the warning message
does not appear on the instrument
cluster, Blind-Spot Collision-Avoidance
Assist may not operate properly. Have
your vehicle inspected by an authorized
retailer of Genesis Branded products.
• If the rear corner radars have been
replaced or repaired, have your vehicle
inspected by an authorized retailer of
Genesis Branded products.
• Use only genuine Genesis parts to
repair the rear bumper where the rear
corner radar is located.
• Rear bumper genuine parts with rear
corner radars have proven their
performance. Replacing or painting the
rear bumper may result in poor
performance of Blind-Spot
Collision-Avoidance Assist. When the
parts need to be replaced or modified,
make sure to use qualified products.
0_IK_PE_en_US.book Page 24
To Next Page
Loading...
Need help?
General
