7-62
Driver assistance system
Smart Cruise Control will operate
properly when snow, rain or foreign
material is removed.
Even though the warning message does
not appear on the instrument cluster,
Smart Cruise Control may not properly
operate.
Smart Cruise Control may not properly
operate in an area (for example, open
terrain), where there is nothing to detect
after turning ON the vehicle.
Limitations of Smart Cruise Control
Smart Cruise Control may not operate
properly, or it may operate unexpectedly
under the following circumstances:
• The detecting sensor or the
surroundings are contaminated or
damaged
• Washer fluid is continuously sprayed, or
the wiper is on
• The camera lens is contaminated due to
tinted, filmed or coated windshield,
damaged glass, or sticky foreign
material (sticker, bug, etc.) on the glass
• Moisture is not removed or frozen on
the windshield
• The field of view of the front view
camera is obstructed by sun glare
• Street light or light from an oncoming
vehicle is reflected on the wet road
surface, such as a puddle on the road
• The temperature around the front view
camera is high or low
• An object is placed on the dashboard
• The surrounding is very bright
• The surrounding is very dark, such as in
a tunnel, etc.
• The brightness changes suddenly, for
example when entering or exiting a
tunnel
• The brightness outside is low, and the
headlights are not on or are not bright
• Driving in heavy rain or snow, or thick
fog
• Driving through steam, smoke or
shadow
• Only part of the vehicle is detected
• The vehicle in front has no tail lights, tail
lights are located unusually, etc.
• The brightness outside is low, and the
tail lights are not on or are not bright
• The rear of the front vehicle is small or
does not look normal (for example,
tilted, overturned, etc.)
• The front vehicle’s ground clearance is
low or high
• A vehicle suddenly cuts in front
• Your vehicle is being towed
• Driving through a tunnel or iron bridge
• Driving near areas containing metal
substances, such as a construction
zone, railroad, etc.
• An object reflecting off the front radar
such as a guardrail, nearby vehicle, etc.
• The bumper around the front radar is
impacted, damaged or the front radar is
out of position
• The temperature around the front radar
is high or low
• Driving in vast areas where there are
few vehicles or structures (for example,
desert, meadow, suburb, etc.)
• The vehicle in front is made of material
that does not reflect on the front radar
• Driving near a highway (or motorway)
interchange or tollgate
• Driving on a slippery surface due to
snow, water puddle, ice, etc.
• Driving on a curved road
• The vehicle in front is detected late
0_IK_PE_en_US.book Page 62
To Next Page
Loading...
