4-18
Instrument cluster
Turn signal indicator light
btn_WAE-202
This indicator light blinks:
When you operate the turn signal
indicator stalk.
If any of the following occur, there may be
a malfunction with the turn signal system.
• The turn signal indicator light
illuminates but does not blink
• The turn signal indicator light blinks
rapidly
• The turn signal indicator light does not
illuminate at all
If any of these conditions occur, have
your vehicle inspected by an authorized
retailer of Genesis Branded products.
High beam indicator light
btn_WKH-97
This indicator light illuminates:
• When the headlights are on and in the
high beam position
• When the turn signal lever is pulled into
the Flash-to-Pass position.
Light ON indicator light
btn_WAE-203
This indicator light illuminates:
When the parking lights or headlights are
on.
High Beam Assist indicator light
btn_WKH-97K
This indicator light illuminates:
When the high-beam is on with the light
switch in the AUTO position.
• White: When High Beam Assist is ready
to operate.
• Green: When Hight Beam Assist is
operating.
If your vehicle detects oncoming or
preceding vehicles, High Beam Assist will
switch the high beam to low beam
automatically.
For more information, refer to the "High
Beam Assist (HBA)" section in chapter 5.
AUTO HOLD indicator light
btn_WTL-207
This indicator light illuminates:
• White: When you activate Auto Hold by
pressing the AUTO HOLD switch.
• Green: When you stop the vehicle
completely by depressing the brake
pedal with Auto Hold activated.
• Yellow: Whenever there is a
malfunction with the Auto Hold
function.
If this occurs, have your vehicle
inspected by an authorized retailer of
Genesis Branded products.
For more information, refer to the
"Electronic Parking Brake (EPB)" section
in chapter 6.
0_IK_PE_en_US.book Page 18