5-10
Convenience features
Replacing the battery
If the smart key is not working properly,
try replacing the battery with a new one.
Battery Type: CR2450
To replace the battery:
1. Press the button (A) to remove the
keyring fixed appliance.
OIK053358L
2. Insert a flat-head screwdriver into the
inner groove to remove the smart key
cover.
3. Remove the old battery and insert the
new battery. Make sure the battery
position is correct.
OIK053325
4. Reinstall smart key cover in the reverse
order of removal.
If you suspect your smart key might have
sustained some damage, or you feel your
smart key is not working correctly,
contact an authorized retailer of Genesis
Branded products.
THIS PRODUCT CONTAINS A BUTTON
BATTERY.
If swallowed, a lithium button battery can
cause severe or fatal injuries within 2
hours. Keep batteries out of reach of
children.
If you think batteries may have been
swallowed or placed inside any part of the
body, seek immediate medical attention.
An inappropriately disposed battery can
be harmful to the environment and
human health. Dispose of the battery
according to your local law(s) or
regulations.
Mechanical key
If the smart key does not operate
normally, you can lock or unlock the
driver's door by using the mechanical key.
1. Press the Genesis text section of the
Mechanical key to remove the case.
OIK053356
0_IK_PE_en_US.book Page 10
To Next Page
Loading...
Need help?
General
