5-32
Convenience features
if equipped
Manual adjustment
OIK053008
To adjust the steering wheel angle and
height:
1. Pull down the lock-release lever (1).
2. Adjust the steering wheel to the desired
angle (2) and distance forward/back
(3).
3. Pull up the lock-release lever to lock the
steering wheel in place.
Sometimes the lock release lever may not
engage completely. This may occur when
the gears of the locking mechanism do
not completely mesh. If this occurs, pull
down on the lock-release lever, readjust
the steering wheel again, and then pull
back up on the release lever to lock the
steering wheel in place.
if equipped
Power adjustment
OIK053009
To change the steering wheel angle and
height:
• Push the switch (1) up and down to
adjust the angle (2).
• Push the switch forward or rearward to
adjust the height (3).
Do not adjust the steering wheel longer
than necessary when the engine is turned
off. This may result in unnecessary
battery drain.
Resetting steering wheel power adjustment
If adjustment is no longer possible within
the operable range while adjusting the
steering wheel position (angle or height),
reset as follows.
1. From the position the steering wheel
has stopped, push the control switch (1)
for 10 seconds in the direction you were
adjusting the steering wheel. The
steering wheel will move in the
direction the control switch is pushed.
2. Continue pushing the switch (1) for at
least 2 seconds after the steering wheel
has stopped. Resetting will be
complete after the operational range is
recognized.
If the adjustment is still not possible
after resetting the steering wheel
power adjustment, have the system
inspected by an authorized retailer of
Genesis Branded products.
0_IK_PE_en_US.book Page 32