7-4
Driver assistance system
Junction Turning function
OIK073002
Junction Turning function can help avoid
a collision with an oncoming vehicle or
powered two-wheeler in an adjacent lane
when turning left at a crossroad with the
turn signal on by applying emergency
braking.
Direct Oncoming function
OIK073243
[A] Oncoming vehicle
Direct Oncoming function helps reduce
the speed at the collision when a vehicle
or powered two-wheeler approaching
from the opposite side is detected.
Detecting sensor
OIK073004L
(1) Front view camera
(2) Front radar
See the illustration above for the detailed
location of the detecting sensors.
Take the following precautions to
maintain optimal performance of the
detecting sensor:
• Never disassemble the detecting
sensor or sensor assembly, or cause
any damage to it.
• If the detecting sensors have been
replaced or repaired, have your vehicle
inspected by an authorized retailer of
Genesis Branded products.
• Never install any accessories or stickers
on the front windshield, or tint the front
windshield.
• Exercise extreme caution to keep the
front view camera dry.
• Never place any reflective objects (for
example, white paper, mirror) over the
dashboard.
• Do not place any objects near the front
windshield or install any accessories on
the front windshield. It can affect the
performance of the defogging and
defrosting function of the climate
control system, which may prevent the
Driver Assistance systems from
operating.
0_IK_PE_en_US.book Page 4
To Next Page
Loading...
