7-8
Driver assistance system
• The operating speed range may be
limited depending on the state of the
vehicle in front or the surroundings.
• During night driving, detection of
powered two-wheelers may degrade
and Forward Collision-Avoidance Assist
may not operate properly or be
temporarily limited.
Stopping vehicle and ending brake control
OIK070009L
• When the vehicle is stopped due to
emergency braking, the "Drive
carefully" warning message will appear
on the instrument cluster.
For your safety, the driver should
depress the brake pedal immediately
and check the surroundings.
• Brake control will end after the vehicle
is stopped by emergency braking for
about 2 seconds.
Junction Turning function
Junction Turning function will warn and
help control the vehicle depending on the
collision risk level: "Collision Warning",
"Emergency Braking" and "Stopping
vehicle and ending brake control".
Collision Warning
OIK070010L
To warn the driver of a collision, the
"Collision Warning" warning message
appears and the warning light blinks on
the instrument cluster with a warning
sound and the steering wheel vibrates.
• The function will operate when your
vehicle speed is about 6-19 mph (10-30
km/h) and the oncoming vehicle,
powered two-wheeler speed is about
19-44 mph (30-70 km/h).
Emergency Braking
OIK070011L
To warn the driver that emergency
braking will be assisted, the "Emergency
Braking" warning message appears and
the warning light blinks on the
instrument cluster with a warning sound
and the steering wheel vibrates.
In emergency braking situation, braking is
assisted with strong braking power to
help prevent collision with the oncoming
vehicle.
0_IK_PE_en_US.book Page 8
To Next Page
Loading...
Need help?
General
