7-32
Driver assistance system
• Driving on an inclined road
OIK073210
Blind-Spot Collision-Avoidance Assist
may not operate properly when driving
on a slope. The function may not detect
the vehicle in the next lane or may
incorrectly detect the ground or
structure.
Always pay attention to road and
driving conditions while driving.
• Driving where the road is
merging/dividing
OIK073211
Blind-Spot Collision-Avoidance Assist
may not operate properly when driving
where the road merges or divides. The
function may not detect the vehicle in
the next lane.
Always pay attention to road and
driving conditions while driving.
• Driving where the heights of the lanes
are different
OIK073212L
Blind-Spot Collision-Avoidance Assist
may not operate properly when driving
where the heights of the lanes are
different. The function may not detect
the vehicle on a road with different lane
heights (underpass joining section,
grade separated intersections, etc.).
Always pay attention to road and
driving conditions while driving.
• When you are towing a trailer or
another vehicle, make sure that you
turn off Blind-Spot Collision-Avoidance
Assist.
• Blind-Spot Collision-Avoidance Assist
may not operate properly if interfered
by strong electromagnetic waves.
• Blind-Spot Collision-Avoidance Assist
may not operate for 3 seconds after the
vehicle is started or the rear corner
radars are initialized.
0_IK_PE_en_US.book Page 32