Genesis G70 - Page 354

7-38
Driver assistance system
2. Push the + switch up or - switch down,
and release it at the desired speed.
Push the + switch up or - switch down
and hold it. The speed will increase or
decrease to the nearest multiple of 5
(multiple of 10 in km/h) at first, and then
increase or decrease by 5 mph (10
km/h).
OIK073026
3. The set speed limit appears on the
instrument cluster.
If you would like to drive over the preset
speed limit, depress the accelerator
pedal beyond the pressure point to
activate the kickdown function.
The set speed limit will blink and chime
will sound until you return the vehicle
speed within the speed limit.
OIK073258N
Information
• When the accelerator pedal is not
depressed beyond the pressure point,
vehicle speed will maintain within the
speed limit.
• A clicking sound may be heard from the
kickdown function when the
accelerator pedal is depressed beyond
the pressure point.
Temporarily pausing Manual Speed
Limit Assist
OIK073027
Press the switch to temporarily pause
the set speed limit. The set speed limit will
turn off but the Speed Limit ( )
indicator will stay on.
Resuming Manual Speed Limit Assist
OIK073040
To resume Manual Speed Limit Assist
after the function was paused, operate
the +, -, switch.
0_IK_PE_en_US.book Page 38