Vehicle Information, Consumer Information and Reporting Safety Defects
2-16
*1 Refer to the "Recommended SAE viscosity number" section.
*2 If the above recommended specification oil is not available, SAE 0W-30 grade synthetic oil can be used. If
mineral oil or semi-synthetic oil is used, it is a severe maintenance condition in terms of engine oil change.
*3 Requires <API SN PLUS (or above) Full synthetic> grade engine oil. If a lower grade engine oil (mineral oil
including Semi-synthetic) is used, then the engine oil and engine oil filter must be replaced as indicated severe
maintenance condition.
*4 Requir
es <API Latest (or ILSAC Latest) or ACEA A5/B5 Full synthe
t
ic> grade eng
ine oil. If a lower grade engine
oil (mineral oil including Semi-synthetic) is used. Then the engine oil and engine oil filter must be replaced as
indicated severe maintenance condition.
*5 To maintain the best braking performance and ABS/ESC performance, use genuine brake fluid that conform to
specifications.
*6 If the front/rear differential is submerged, visit an authorized retailer of Genesis Branded products to
immediately replace the differential oil.
*7 Be sure to inject oil for exclusive use of LSD when replacing Rear Differential Oil (if equipped with Limited Slip
Differential).
Transfer case oil (AWD)
Gear/Clutch 0.60 US qt. (0.57 â„“)
SHELL TF 0870B
Actuator 0.26 US qt. (0.25 â„“)
Fuel 15.8 US gal. (60 â„“)
Refer to the "Fuel
requirements" section in
chapter 1.
Lubricant Volume Classification
0_IK_PE_en_US.book Page 16
To Next Page
Loading...
Need help?
General
