3-8
Safety system
Seat cushion tilt/height adjustment
OIK033006
Seat cushion tilt (1)
To change the angle of the front part of
the seat cushion:
1. Push the front portion of the control
switch up to raise or down to lower the
front part of the seat cushion.
2. Release the switch once the seat
reaches the desired position.
Seat cushion height (2)
To change the height of the seat cushion:
1. Push the rear portion of the control
switch up to raise or down to lower the
height of the seat cushion.
2. Release the switch once the seat
reaches the desired position.
Seatback angle adjustment
OIK033005
To recline the seatback:
1. Push the control switch forward or
rearward.
2. Release the switch once the seatback
reaches the desired position.
Seat cushion extension adjustment (for
if equipped
driver's seat)
OIK033004
To move the front part of the cushion
forward or rearward:
1. Push the control switch forward or
rearward.
2. Release the switch once the seat
cushion reaches the desired length.
if equipped
Lumbar support
OIK033007
To adjust the lumbar support:
1. Press the front portion of the switch (1)
to increase support or the rear portion
of the switch (2) to decrease support.
2. Press switch (3) or (4) to move the
support position up or down.
3. Release the switch once the lumbar
support reaches the desired position.
0_IK_PE_en_US.book Page 8