3-20
Safety system
• If the seat belt is unfastened while
driving, the seat belt warning operates
as follows depending on vehicle speed.
- Under 12 mph (20 km/h): The
corresponding seat belt warning light
illuminates for about 70 seconds.
- Over 12 mph (20 km/h): The
corresponding seat belt warning light
blinks and the warning chime sounds
for about 35 seconds.
• If the seat belt is fastened, the
corresponding seat belt warning light
turns off immediately.
Seat belt restraint system
Driver's seat belt – 3-point system
with emergency locking retractor
To fasten your seat belt:
Pull the belt out of the retractor and insert
the metal tab (1) into the buckle (2). There
will be an audible "click" when the tab
locks into the buckle. Make sure the seat
belt is not twisted.
OIK033127
You should place the lap belt (1) portion
across your hips and the shoulder belt (2)
portion across your chest.
2C_SeatBeltCorrectWear
The seat belt automatically adjusts to the
proper length after the lap belt portion is
adjusted manually so that it fits snugly
around your hips. If you lean forward in a
slow, easy motion, the belt will extend
and move with you.
If there is a sudden stop or impact, the
belt will lock into position. It will also lock
if you try to lean forward too quickly.
If you are not able to smoothly pull
enough of the seat belt out from the
retractor, firmly pull the seat belt out and
release it. After release, you will be able to
pull the belt out smoothly.
2C_SeatBeltWearStep_2
Improperly positioned seat belts may
increase the risk of serious injury in an
accident. Take the following precautions
when adjusting the seat belt:
0_IK_PE_en_US.book Page 20