Zoom20/30/35 Pro | 20User Interface
3.6 Pointsearch
Description Pointsearch is a function used by programs to find measured or known points in the memory storage.
It is possible to limit the point search to a particular job or to search the whole storage. The search proce-
dure always finds known points before measured points that fulfil the same search criteria. If several
points meet the search criteria, then the results are ordered according to the entry date. The instrument
finds the most recent known point first.
Direct search By entering an actual point number, for example 402, and pressing SEARCH, all points within the selected
job and with the corresponding point number are found.
Wildcard search The wildcard search is indicated by a "*". The asterisk is a place holder for any following sequence of char-
acters. Wildcards should be used if the point number is not fully known, or to search for a batch of points.
Examples of point
searches
* All points are found.
A All points with exactly the point number "A" are found.
A* All points starting with "A" are found, for example, A9, A15, ABCD, A2A.
*1 All points containing only one "1" are found, for example, 1, A1, AB1.
A*1 All points starting with "A" and containing only one "1" are found, for example, A1, AB1, A51.
SEARCH
To search for matching points within the
selected job.
To Next Page
Loading...
Need help?
General
