Data Management Zoom20/30/35 Pro | 81
DATA IMPORT
Import data step-by-
step
1) Press OK in the DATA IMPORT screen to proceed to the USB memory stick file directory.
2) Select the file on the USB memory stick to be imported and press OK.
3) Define the Job name for the imported file, and, if requested, the file definition and layers, and press
OK to import. If a Job with the same name already exists in the internal memory, a message will
appear with the options to overwrite the existing job or rename the job for the file being imported.
4) A message will display once the file has been successfully imported.
12.4 Working with a USB Memory Stick
Insert a USB memory
stick step-by-step
Always return to the Main Menu before removing the USB memory stick.
GeoMax cannot be held responsible for data loss or any other error that may occur when using a USB
memory stick.
• Keep the USB memory stick dry.
• Use it only within the specified temperature range.
• Protect the USB memory stick from direct impacts.
Failure to follow these instructions could result in data loss and/or permanent damage to the USB memory
stick.
Field Description
From USB-Stick
To Instrument
File Single File
Lift the lid covering the USB host port on the instrument.
Insert the USB memory stick into the USB host port.
Zoom_008
To Next Page
Loading...
Need help?
General
