Zoom20/30/35 Pro | 82Data Management
12.5 Working with Bluetooth
Description Zoom30 Pro/Zoom35 Pro instruments can communicate with external devices via a Bluetooth connection.
The instrument Bluetooth is a slave only. The Bluetooth of the external device will be the master, and
therefore will control the connection and any data transfer.
Establishing a connec-
tion step-by-step
1) On the instrument ensure that the communication parameters are set to Bluetooth and On. Refer to
"5.3 Communication Settings".
2) Activate Bluetooth on the external device. The steps required depend on the Bluetooth driver and other
device specific configurations. Refer to the device user manual for information on how to configure and
search for a Bluetooth connection.
The instrument will appear on the external device.
3 Some devices ask for the identification number of the Bluetooth. The default number for a Zoom Blue-
tooth is 0000. This can be changed by:
•Select Settings from the MAIN MENU.
•Select Comm. from the SETTINGS menu.
•Press BTCode from the COMMUNICATION SETTINGS screen.
• Enter a new Bluetooth code in BT-Code:
• Press OK to confirm the new Bluetooth code.
4 When the external Bluetooth device has located the instrument for the first time, a message will display
on the instrument stating the name of the external device and requesting confirmation that connection
to this device should be allowed.
• Press YES to allow, or
• Press NO to disallow this connection
5 The instrument Bluetooth sends out the instrument name and serial number to the external Bluetooth
device.
6 All further steps must be made in accordance to the user manual of the external device.
Transferring data via
Bluetooth
Using GGO Data Exchange Manager, data files can be transferred from the instrument to a local folder via
the Bluetooth connection. The transfer is made through the serial port configured on the computer as the
Bluetooth Serial Port, however, for faster data transfer speeds we recommend using the USB or RS232
connections.
For more information about GGO Data Exchange Manager refer to the comprehensive online help.
For transferring data using other external devices or software programs, refer to the user manual of the
device or software. The Zoom30 Pro/Zoom35 Pro Bluetooth does not establish or manage the data
transfer.
12.6 Working with GeoMax Geo Office and GGO Tools
Description The program package GGO is used for the data exchange between the instrument and a computer. It
contains several auxiliary programs in order to support the instrument.
Installation on a
computer
The installation program can be found on the CD-ROM supplied. Insert the CD and follow the on-screen
instructions. Please note that GGO can only be installed on computers with MS Windows 2000, XP, Vista
and Windows 7 operating systems.
For more information about GGO refer to the comprehensive online help.
To Next Page
Loading...
Need help?
General
