GRAPHTEC CE LITE-50 - Data Creation and Cutting Precautions

CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
6-15
(5) Move the carriage to the left end.
Fix the Y-exible cable with double-sided tapes at a position where the left edge of the Y-exible
cable is within the range as shown in the picture below.
Conrm that the left edge of
the cable is within this range.
300 mm from the right edge
Fix the Y-exible cable at the two
positions as shown below.
(6) Reattach the other parts in the reverse order in which they were detached.