CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
6-57
(9) Remove the two M3L6 binding head screws holding the cutting mat base, and then detach the
cutting mat base from the right side.
M3L6 binding head screw
M3L6 binding head screw
How to disassemble the cutting mat base
(1) Remove the two M3L6 binding head screws and the eight M3L6 self-tapping screws holding the
cutting mat base plate, and then detach the cutting mat base plate.
To Next Page
Loading...
