6 DISASSEMBLY AND REASSEMBLY
CE LITE-UM-251-9370 6-80
How to disassemble the pinch roller
(1) Twist the pinch roller and the pinch roller holder in the reverse direction, and then detach the pinch
roller from the pinch roller holder.
How to reassemble the pinch rollers
(1) Insert the pinch roller to the pinch roller holder.
(2) Twist the pinch roller and the pinch roller holder until the boss on the pinch roller ts into the hole
on the pinch roller holder
How to reattach the pinch rollers
CAUTION
Be sure to work on a at surface such as a level block when reattaching the side frame.
(1) Clean the pinch roller shaft, and then apply an appropriate amount of SANKOL CFD-5010-Z to the
entire shaft.
To Next Page
Loading...
