GSi TYMPSTAR Series User Manual

Chapter 8
Location of potentiometer is in
the left rear corner of the power
supply.
Pins 1,2,3 = +5.00 Volts DC
Pins 4,5,7 ground reference
Pins 8, 9 = +24 VDC
Pins 10,12= 0VDC
Pin 11= -12VDC
Pin 13= +12VDC
Pin 13
Pin 1 (Red wire)
Pin 1=+24VDC
Pins 2,3= ground reference
Pin 4=+12VDC
Pin 5= -12VDC
Pins 6,7= ground reference
Pins 8,9= -5VDC
Pins 10,11,12= ground reference
Pin 1 (Red wire)
Grason-Stadler
Power Supply (set
+5VDC)
Analog Board (J7)
Analog Board (J6)
8 - 2

GSi TYMPSTAR Series Specifications

General

Brand	GSi
Model	TYMPSTAR Series
Category	Measuring Instruments
Language	English