Chapter 3
3) Press the VERSION softkey to display the Version Menu.
NOTE
To return to the Instrument Options menu with no version switching action
taken, press the RETURN hardkey from the Version menu.
1) Press the V1 TEMPORARY softkey to change the instrument to V1 func-
tionality temporarily. The message: SWITCHING TO A V1 INSTRU-
MENT. WAITING FOR WARM START will appear. The system will
then reboot and reinitialize as a TympStar Version 1.
The V1 Temporary mode allows the instrument to be switched back to V2
mode
. The instrument will stay in V1 Temporary mode indefinitely, until
changed back to V2 mode as described below.
1) Press the V2 softkey in the Version Menu. Lock and key codes are dis-
played on the screen.
NOTE
Press the CONTINUE softkey from this screen to keep the TympStar in
the V1 Temporary mode.
2) Press the DATA TRANSFER hardkey. The message: SWITCHING TO A
V2 INSTRUMENT. WAITING FOR WARM START will appear.
The
system will then reboot and reinitialize as a TympStar Version 2.
1) Press the V1 PERMANENT softkey in the Version Menu to change the
instrument to V1 functionality permanently. The message: ARE YOU
SURE YOU WANT TO CHANGE THIS TO A V1 INSTRUMENT? will
appear.
CAUTION
Once an instrument is changed to V1 permanently it cannot be changed
back to V2 without a license key from Grason-Stadler.
Grason-Stadler
To Next Page
Loading...
Need help?
General
