EasyManua.ls Logo

GTS iMAPLA series - Repairs; Repair; Repair Safety and Procedures

GTS iMAPLA series
168 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 141 Issue 08/2013
Repairs/repair
Maintenance work carried out by authorised personnel
8 Repairs/repair
The user is not allowed to carry out any repair work on the IMAPLA system.
Such work is only to be carried out by authorised and qualied specialists.
We strongly recommend you to replace the generator system for this
work before sending it to the manufacturer or aparty approved by the
manufacturer.
CAUTION
Work on the drive system based on the requirements and provisions of
the respective drive/system manufacturer. This also includes mounted
protective coverings. This work must be performed by the person
responsible for the machine.
Danger
Risk of injury and risk of damage!
y
Opening or disassembling the iMAPLA system
puts the system at risk and compromises the
safety of the user.
Do not open or dismantle the iMAPLA system!
The iMAPLA system may only be opened by the
manufacturer or aparty authorised by it.
Only carry out the work described in this manual.
Danger
Danger to life through electric shock
y
During operation, the power generation system generates
voltages that are potentially fatal.
Work on the electrical installations and equipment must
only be carried out after the system has been switched o
and is de-energised.
Switch o the drive unit before all inspection or
maintenance work on the generator or switch box.
Prevent the drive unit from being switched back on
by accident (e.g.remove the ignition key and keep
somewheresafe).

Table of Contents