GTS iMAPLA series - Customer-Specific MMI Versions and Accessories

Issue 08/2013 Page 154
MAPLA- Modular energy supply system for load lifting magnets
Options and accessories
Customer-specic MMI versions
11.1.8 Technical specications, MMI with radio modem
Operating frequency 433.25MHz to 434.60MHz
28channels, spacing between channels
50kHz
Frequency processing Synthesize technology
Neighbouring transmission loss 40dB
Transmission power 10dBm (10mW)
Capacity max. 400m in free space
Working temperature range -10°C to +55°C
11. 2 Customer-specic MMI versions
As well as the MMI versions described in this manual, MMI versions adapted
to specic customer needs are also available. If the iMAPLA system is
equipped with an MMI adapted to specic customer needs, observe the
additional specications.
Possible special functions through the use of MMIs with quickcouplers or
“INT MSF” version are explained in separate additional brief descriptions
(enclosed with the MMI). The basic functions described in this manual always
apply, however.
11. 3 Accessories
Documents concerning the available accessories are available from the
manufacturer.
The following are available:
y Diagnostic tools “System tester” or laptop software (for CAN interface of
iMAPLA series 2013) for displaying all system values and reading statistical
values (fault memory data)
y Protective covers and rain covers
y Fan covers with intake manifold
(for installing the generator in the engine compartment)
y Diverse belts and hydraulic kits
y Cable adapters/terminal border adapter for magnetic load line
y Safety sockets for magnetic connection at the boom
y Universal assembly of plates for generator installation