Page 97 Issue 08/2013
Operation
Safety instructions for operation
Caution
Burn hazard
y
Parts of the iMAPLA system can get very hot during and after
operation.
► Allow the iMAPLA-System and parts to cool down before
touching.
Important
y
The optionally built-in insulation monitor must trip in the
self-test.
► Refrain from using the power generation system if the
insulation monitor does not trip.
In this case, send the power generation system for repairs.
Ö Daily inspection of the insulation monitor, page107
Ö Repairs/repair, page141
CAUTION
y Only operate the iMAPLA system under the indicated environment- and
cooling conditions.
y Observe the technical data.
Ö Technical data, page51
To Next Page
Loading...