GW Instek APS-7000 Series - [:Source]:Simulation:abnormal:time; [:Source]:Simulation:abnormal:voltage; [:Source]:Simulation:cstep

REMOTE CONTROL
113
[:SOURce]:SIMulation:ABNormal:TIME
Set
Query
Description
Sets or queries the Time parameter of the abnormal
step for the Simulation mode.
Syntax
[:SOURce]:SIMulation:ABNormal:TIME
{<NR2>|MINimum|MAXimum}
Query Syntax
[:SOURce]:SIMulation:ABNormal:TIME?
[MINimum|MAXimum]
Parameter/Return
parameter
<NR2>
Time of the abnormal step in seconds
MINimum
0
MAXimum
99.99s
Example
:SIM:ABN:TIME 1
Sets the abnormal step time to 1 second.
[:SOURce]:SIMulation:ABNormal:VOLTage
Set
Query
Description
Sets or queries the Vset parameter of the abnormal
step for the Simulation mode.
Syntax
[:SOURce]:SIMulation:ABNormal:VOLTage
{<NR2>|MINimum|MAXimum}
Query Syntax
[:SOURce]:SIMulation:ABNormal:VOLTage?
[MINimum|MAXimum]
Parameter/Return
parameter
<NR2>
Voltage of the abnormal step.
MINimum
Minimum settable voltage
MAXimum
Maximum settable voltage
Example
:SIM:ABN:VOLT MAX
Sets the abnormal step voltage to the maximum.
[:SOURce]:SIMulation:CSTep
Query
Description
Returns the currently running step.
Query Syntax
[:SOURce]:SIMulation:CSTep?