GW Instek APS-7000 Series Programming Manual

APS-7000 Programming Manual
86
:SYSTem:CONFigure:TRIGger:INPut
:WIDTh
Set
Query
Description
Sets or queries the type of trigger input. The
trigger input can be set as a user-defined pulse
width or as a trigger level.
Syntax
Query Syntax
:SYSTem:CONFigure:TRIGger:INPut:WIDTh
{<NR2>|MINimum|MAXimum}
:SYSTem:CONFigure:TRIGger:INPut:WIDTh?
[MINimum|MAXimum]
Parameter
<NR2>
0, 0.1ms ~ 60ms. 0 = trigger controlled by
trigger level, not pulse width.
MINimum
0
MAXimum
60ms
Return parameter
<NR2>
Returns the input width.
Example
:SYST:CONF:TRIG:INP:WIDT 0.005
Sets the input width to 5ms.
:SYSTem:CONFigure:TRIGger:OUTPut
:WIDTh
Set
Query
Description
Sets or queries the type of trigger output. The
trigger output can be set as a user-defined pulse
width or as a trigger output level.
Syntax
Query Syntax
:SYSTem:CONFigure:TRIGger:OUTPut:WIDTh
{<NR2>|MINimum|MAXimum}
:SYSTem:CONFigure:TRIGger:OUTPut:WIDTh?
[MINimum|MAXimum]
Parameter
<NR2>
0, 0.1ms ~ 60ms. 0 = trigger output is set
to output level, not pulse width.
MINimum
0 = trigger level
MAXimum
60ms
Return parameter
<NR2>
Returns the output width.
Example
:SYST:CONF:TRIG:OUT:WIDT 0.005
Sets the input width to 5ms.

GW Instek APS-7000 Series Specifications

General

Brand	GW Instek
Model	APS-7000 Series
Category	AC Power Distribution
Language	English