GW Instek APS-7000 Series - Cls; Ese

REMOTE CONTROL
53
IEEE 488.2 Common Commands
*CLS ............................................................................. 53
*ESE ............................................................................. 53
*ESR ............................................................................. 54
*IDN ............................................................................ 54
*OPC ............................................................................ 54
*RCL ............................................................................ 55
*RST ............................................................................. 55
*SAV ............................................................................ 55
*SRE ............................................................................. 55
*STB ............................................................................. 56
*TST ............................................................................. 56
*WAI ............................................................................ 56
*TRG ............................................................................ 56
*CLS
Set
Description
The *CLS command clears all the event registers,
including the status byte, event status and error
queue.
Syntax
*CLS
*ESE
Set
Query
Description
Sets or queries the Standard Event Status Enable
register.
Syntax
Query Syntax
*ESE <NR1>
*ESE?
Parameter
<NR1>
0~255
Return parameter
<NR1>
Returns the bit sum of the Standard Event
Status Enable register.