GW Instek APS-7000 Series Programming Manual

APS-7000 Programming Manual
128
Status Register Overview
To program the APS power supply effectively,
the Status registers need to be understood. This
chapter explains in detail how the Status registers
are used and how to configure them.
Introduction to the Status Registers ...................... 128
The Status Registers ................................................ 129
Questionable Status Register Group ..................... 130
Operation Status Register Group .......................... 133
Warning Status Register Group ............................ 135
Standard Event Status Register Group ................. 137
Status Byte Register & Service Request Enable
Register ..................................................................... 139
Introduction to the Status Registers
Overview
The status registers are used to determine the
status of the power supply. The status registers
maintain the status of the protection conditions,
operation conditions and instrument errors.
The APS Series have a number of register
groups:
 Questionable Status Register Group
 Standard Event Status Register Group
 Operation Status Register Group
 Warning Status Register Group
 Status Byte Register
 Service Request Enable Register
 Service Request Generation
 Error Queue
 Output Buffer

GW Instek APS-7000 Series Specifications

General

Brand	GW Instek
Model	APS-7000 Series
Category	AC Power Distribution
Language	English