GW Instek APS-7000 Series Programming Manual

APS-7000 Programming Manual
82
Return parameter
<NR1>
+0
Ramp mode is disabled.
+1
Time mode
+2
Voltage mode
:SYSTem:CONFigure:RAMP:VOLTage
Set
Query
Description
Sets or queries the ramp Vup and Vdn parameters.
Syntax
:SYSTem:CONFigure:RAMP:VOLTage[:LEVel][:AMPLitu
de] {<NR2>|MINimum|MAXimum,<NR2>|MINimum
|MAXimum}
Query Syntax
:SYSTem:CONFigure:RAMP:VOLTage[:LEVel][:AMPLitu
de]? [MINimum|MAXimum]
Parameter
<NR2>
Vup (Vrms).
MINimum
Minimum Vup.
MAXimum
Maximum Vdn.
<NR2>
Vdn (Vrms).
MINimum
Minimum Vup.
MAXimum
Maximum Vdn.
Return parameter
<NR2>,<NR2>
Returns the Vup,Vdn voltage levels.
Example
:SYST:CONF:RAMP:VOLT?
>+0.2000,+0.3000
Returns the Vup,Vdn values.
:SYSTem:CONFigure:RAMP:TIME
Set
Query
Description
Sets or queries the ramp Tup and Tdn parameters.
Syntax
:SYSTem:CONFigure:RAMP:TIME {<NR2>|
MINimum|MAXimum,<NR2>|MINimum|MAXimum}
Query Syntax
:SYSTem:CONFigure:RAMP:TIME?
[MINimum|MAXimum]
Parameter
<NR2>
Tup in milliseconds
MINimum
Minimum Tup
MAXimum
Maximum Tup
<NR2>
Tdn in milliseconds
MINimum
Minimum Tdn
MAXimum
Maximum Tdn

GW Instek APS-7000 Series Specifications

General

Brand	GW Instek
Model	APS-7000 Series
Category	AC Power Distribution
Language	English