GW Instek APS-7000 Series Programming Manual

APS-7000 Programming Manual
68
Status Commands
For an overview of all the status registers, their associated register
contents and the system diagram, please see the status overview on
page 125
:STATus:OPERation:CONDition ............................ 68
:STATus:OPERation:ENABle ................................... 68
:STATus:OPERation[:EVENt] .................................. 69
:STATus:OPERation:NTRansition .......................... 69
:STATus:OPERation:PTRansition ........................... 69
:STATus:QUEStionable[:EVENt]............................. 70
:STATus:QUEStionable:CONDition ....................... 70
:STATus:QUEStionable:ENABle ............................. 70
:STATus:QUEStionable:NTRansition ..................... 70
:STATus:QUEStionable:PTRansition ...................... 71
:STATus:PRESet ......................................................... 71
:STATus:WARNing:CONDition ............................. 72
:STATus:WARNing:ENABle ................................... 72
:STATus:WARNing[:EVENt] ................................... 72
:STATus:WARNing:NTRansition ........................... 73
:STATus:WARNing:PTRansition ............................ 73
:STATus:OPERation:CONDition
Query
Description
Queries the Operation Status register. This query
will not clear the register.
Syntax
:STATus:OPERation:CONDition?
Return
<NR1>
Returns the bit sum of the Operation
Condition register. (0~32767)
:STATus:OPERation:ENABle
Set
Query
Description
Sets or queries the bit sum of the Operation Status
Enable register.

GW Instek APS-7000 Series Specifications

General

Brand	GW Instek
Model	APS-7000 Series
Category	AC Power Distribution
Language	English