GW Instek APS-7000 Series Programming Manual

APS-7000 Programming Manual
76
Note:
The setting will only be valid after the power has
been cycled.
Syntax
Query Syntax
:SYSTem:COMMunicate:LAN:DHCP
{<bool>|OFF|ON}
:SYSTem:COMMunicate:LAN:DHCP?
Parameter
OFF | 0
DHCP off
ON | 1
DHCP on
Return parameter
<bool>
Returns the DHCP status.
:SYSTem:COMMunicate:LAN:DNS
Set
Query
Description
Sets or queries the DNS address.
Note:
The setting will only be valid after the power has
been cycled.
Syntax
Query Syntax
:SYSTem:COMMunicate:LAN:DNS <string>
:SYSTem:COMMunicate:LAN:DNS?
Parameter/Return
<string>
DNS in string format ( “mask”)
Applicable ASCII characters: 20H to 7EH
Example
SYST:COMM:LAN:DNS “172.16.1.252”
Sets the DNS to 172.16.1.252.
:SYSTem:COMMunicate:LAN:GATEway
Set
Query
Description
Sets or queries the Gateway address.
Note:
The setting will only be valid after the power has
been cycled.
Syntax
Query Syntax
:SYSTem:COMMunicate:LAN:GATEway <string>
:SYSTem:COMMunicate:LAN:GATEway?
Parameter/Return
<string>
Gateway address in string format ( “address”)
Applicable ASCII characters: 20H to 7EH
Example
SYST:COMM:LAN:GATE “172.16.0.254”
Sets the LAN gateway to 172.16.0.254.

GW Instek APS-7000 Series Specifications

General

Brand	GW Instek
Model	APS-7000 Series
Category	AC Power Distribution
Language	English