GW Instek APS-7000 Series - Rcl; Rst; Sav; Sre

REMOTE CONTROL
55
*RCL
Set
Description
Recalls the contents stored in memory slot M0 ~
M9. These memory slots are mapped to the preset
settings.
Syntax
*RCL {<NR1>|MAX|MIN}
Parameter
<NR1>
0 ~ 9 (as memory M0 ~ M9)
MIN
Recalls the M0 memory contents.
MAX
Recalls the M9 memory contents.
*RST
Set
Description
Performs a device reset. Configures the unit to a
known configuration (default settings). This
known configuration is independent of the usage
history.
Syntax
*RST
*SAV
Set
Description
Saves the settings into memory slot M0 ~ M9.
These memory slots are mapped to the preset
settings.
Syntax
*SAV {<NR1>|MIN|MAX}
Return parameter
<NR1>
0 ~ 9 (as memory M0 ~ M9)
*SRE
Set
Query
Description
Sets or queries the Service Request Enable register.
The Service Request Enable register determines
which registers of the Status Byte register are able
to generate service requests.
Syntax
Query Syntax
*SRE <NR1>
*SRE?